User's Manual

During live view mode, it is possible to zoom into a section of the screen to get a close-up

view of the screen.

1. To activate the digital zoom, select the full screen display of the camera you wish to

zoom.

2. Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, as

shown below.

3. Move the box to the desired position using Direction [

] buttons.

4. Press [+] button to enlarge the image. Press [ - ] button to zoom out the image.

5. Press [ESC] button to return normal mode.

<Note>

 If the Zoom button is pressed while in a multi-screen display, zoom operation is not

activated.

x 2 x 4 x 8