User's Manual

33
2.3. DEVICE
1) MOTION
Press SETUP button to set up motion function.
a. Motion Zone : Set up to 4 Motion areas defined by selected parts.
b. Motion Grid : The area property is highlighted and motion detection can now be
observed in the view window. By default, it’s set to OFF.

: Select All. Press [OK] to select.
 : : Clear All. Press [OK] to select.

: Select specific. Press [OK] to select.
c. Motion Level : The sensitivity settings are : 1: Low sensitivity ~ Level 20: High
sensitivity. By default, the level is set to 10.
d. APPLY : Save changed set up.
e. SAVE : Save changed set up and exit automatically.
To define the motion view area cell-by-cell, do the
following:
On the front panel or remote control, press any of
direction buttons to highlight a cell in the motion
detection area, and then press [OK]. This area is