User's Manual

35
- OFF: Stops recording when the HDD is full.
4) Auto Delete: Allows you to configure when the NVR automatically deletes all
data from HDD. It leaves the data for a selected duration from the current time.
[NONE  12HOURS  1DAY~ 6DAYS  1WEEK ~ 4WEEKS-> 30 DAYS]
5) Pre-Record: Determines the duration the NVR stores recorded video prior to
the beginning of Event Recoding
[5SEC ~ 300 SEC]. By default 5 sec.
6) Post- Record: Determines the duration the NVR continues to record for after
an Event detection [5SEC ~ 300 SEC]. By default 5 sec.
<Note>1. Alarm/Motion Duration is extended if there is another Alarm/Motion detected whilst
Event Recording.
2. When recording, the Pre-Record and Post-Record will not be activated.
3. To save changes and exit the menu, select [save] then press the [MENU] button.
4. To exit the menu without making changes, press the [ESC] button.
3.2. Continuous / Normal Recording
The NVR comes with certain preset settings from the factory. Therefore, once the NVR
is installed immediate recording is possible by pressing the record button. By default,
audio, alarm, motion recording are off.
The NVR records video data continuously over a 24 hour period. Recording setup is for
normal recording. Different settings can be configured for each camera. To copy the setting
to another channel, press [Display] button.
ITEM
ADJUSTMENT
Audio
 Select Audio Record ON/OFF