User's Manual

7. DEVICE

7.1. GENERAL

1) DISPLAY : Please decide output video resolution

 It can be set to the correct video resolution on the monitor.

[1920*1080P (default) 800*600  1024*768  1280*720  1280*1024

 1600*1200  1680*1050  1920*1080I]

 HDMI AUTO

Automatically detects and sets the HDMI resolution on the monitor connected to the

NVR. It might display “no video” if a VGA monitor is not able to support high

resolution.

<NOTE>

In order to connect HDMI and VGA output to use both monitors, please set up

as the lowest resolution without selecting HDMI AUTO.

2) Keypad Model: Select Joystick Controller and Baud Rate.

3) Extend Device: Select a model of POS/ATM.

4) PTZ Event: BHA-WC100 Model does not support this feature.

5) Alarm Out: DURATON [OFF,1SEC ~ 5 SEC]: Select Alarm duration.

6) IP CAM SET UP :

After click in the menu, all IP cameras which are connected in LAN

network will be listed in the IP CAM Discovery menu.