User's Manual

75
TIME SEARCH CHART displays different outcomes according to the SEARCH
MODE below.
[FIGURE 1]
1. Press the “Event Select “button to change search mode.
2. Press [OK] to set up. Press [+/-] button to select “event record”.
3. Press [+/-] button to select “SEARCH MODE “(Event Source /Motion Area).
By selecting Search Mode, TIME SEARCH CHART displays different outcomes.
<Note> EVENT RECORD is set by default and makes the TIME SEARCH
CHART display EVENT recording in Red as above FIGURE 1.
2.4 Event Source Search
Event source search feature allows you to search the recording data for ALARM,
MOTION and VLOSS events previously triggered on the NVR.