User's Manual

76
1. Press [+/-] button to select “Event Source” in search mode.
And select the event source (Alarm, Motion, Vloss) which you want to search.
1) ALARM: Select Alarm Input 1~4.
2) MOTION: Select the channel 1~16.
3) VLOSS (Video Loss): Select the channel 1~16.
4) SYSTEM:
Inactivated
2. Users can have multiple selections by pressing icon, as shown below.
2.5 Motion Area Search (Single Channel Playback)
The NVR searches for recorded video that matches the search area defined by selected
cells.
1. Select “MOTION AREA” (single channel playback) to search the recording data that
has motion in a specific area on a certain channel.