User's Manual

83
2. Auto Back Up (FTP)
1. Use the [-, +] button to change the selected device to FTP
2. Use the directional buttons to move to FTP Setup. The menus are displayed with options
in the left-hand column and settings in the right hand column.
<Note> Please Refer to [LOCAL PLAYER]/ [Mini-Player] section to read about back-up file
ITEM
ADJUSTMENT
Server  Select Highlight FTP Server and then press numeric buttons to define an FTP server.
Port
 Define the port that the FTP server will communicate through.
User ID  Enter the user ID of FTP Server.
Password  Enter the password.
Connection  Select PASSIVE mode or REGULAR Mode.
BACKUP
PATH
 The path should be made in the FTP server in advance. Mac address is set with the
default in consideration of the scenario where lots of NVR’s backup files to the same
FTP server.