User's Manual

86
4) Model Description: Shows the description on the IP Camera.
5) ※ : Shows the wireless module number of the NVR
1.2 Auto Link
1) Use Up/Down [] buttons and Left/Right [] buttons to select Auto Link
2) Automatically connects the IP Cameras to unoccupied channels.
1.3 Refresh
1) Use Up/Down [] buttons and Left/Right [] buttons to select refresh
2) Automatically refreshes to scan for IP Cameras that are connected to the wireless
network.
２. STATUS
2.1 List
- Shows the current status of the wireless module on the NVR.
1) B-CDMA ID : Shows ID of the wireless module on NVR.
2) F/W VERSION : Shows the firmware’s version of the wireless module on NVR.
3) PID : Shows ID used to wirelessly communicate on the PICONET.
- PICONET ID must be matched between IP Cameras and NVR in order to establish
wireless connection.
4) CID : Shows the connected frequency channel.
- 2.4GH : Channel 0~4
- 5.8GH : Channel 12~19
5) STN : Shows the connected numbers of NVRs and IP Cameras.
- STN = NVR(1ea) + IP Cameras
6) Status: Shows the current status of the wireless module on the NVR.