User`s manual

eBOX832-840 Series User’s Manual
Award BIOS Utility
31
Enabled
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS can not
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by
track number. There will be no warning message
displayed if the installed drive is 360K.
z Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is “On”.
z Gate A20 Option
The default value is “Fast”.
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port
92 or chipset specific method.
z Typematic Rate Setting
This item determines the typematic rate of the keyboard. The
default value is “Disabled”.
Enabled
Enable typematic rate and typematic delay
programming.
Disabled
Disable typematic rate and typematic delay
programming. The system BIOS will use default value
of these 2 items, controlled by keyboard.
z Typematic Rate (Chars/Sec)
This option refers to character numbers typed per second by the
keyboard. The default value is “6”.
6
6 characters per second
8
8 characters per second
10
10 characters per second
12
12 characters per second
15
15 characters per second
20
20 characters per second
24
24 characters per second
30
30 characters per second
z Typematic Delay (Msec)
This option defines how many milliseconds must elapse before a