Specifications

Chapter 2: Web Configuration
42
Access Control
This page allows you to make access control to the AP or connected clients by offering the MAC
Addresses of the clients.
MAC Restrict Mode:
Click Disabled to welcome all of the clients on the network; select Allow to permit only the
clients on the list to access the cable modem; or choose Deny to prevent the clients on the
list to access this device.
MAC Address:
Enter the MAC addresses of the connected clients into the fields, and then click Apply to
add them to the list for access control.
Apply:
After proper configuration, click Apply to invoke the settings.
Connected Clients:
The information of current connected clients will be displayed here.