Enable-IT 860 Pro Rev B Professional Grade Ethernet Extender User Manual All Rights Reserved 1997 - 2013 ENABLE-IT - Proprietary and Confidential
Copyright © 1997-2013 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form, or by any means, or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc., to provide notification of such revision or change. Enable-IT, Inc.
TABLE OF CONTENTS ABOUT THIS USER MANUAL ...................................................................................... 4 INTRODUCING THE 860 PRO ETHERNET EXTENDER KIT ............................................. 5 About The 860 Pro Ethernet Extender Kit ................................................... 5 Key Benefits ................................................................................................ 6 Summary Of Features ...........................................................
ABOUT THIS USER MANUAL This product User Manual provides all the information needed to install and use the Enable-IT 860 Pro Ethernet Extender Kit. This User Manual is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks), PoE (Power-over-Ethernet) and voice telecom wiring.
INTRODUCING THE 860 PRO ETHERNET EXTENDER KIT Congratulations on purchasing Enable-IT’s 860 Pro Ethernet Extender Kit — the simplest method to stretch your broadband solutions for in-building deployment in commercial office buildings, hotels, and multi-tenant residential units. The 860 Pro extended Ethernet product offers the lowest cost solution in a simple design for rapid install using existing 1-pair Telco wiring.
Key Benefits The following list identifies the 860 Pro Ethernet Extender Kit key benefits. Dramatic cost reduction over any competing technology and includes a 4-Port 10/100 LAN switch on each end. Rapid installation with small box profile, no programming and no firmware to upgrade Broadband technology that delivers in-building Ethernet access over 1-pair of existing Category 2, up to Category 5e, 6 or 7, wiring at a maximum distance of 6,000ft (1,829m).
Typical Use Applications The Enable-IT, Inc. 860 Pro extended Ethernet units are usually installed into telephone wiring infrastructures where extension of backbone services is required and expensive fiber options are prohibitive. The 860 Pro Ethernet Extender Kit allows a standard Ethernet segment to be deployed quickly over existing 1-pair Telco copper wiring in combination with existing POTS voice signals.
INSTALLING THE 860 PRO ETHERNET EXTENDER KIT The Enable-IT 860 Pro Ethernet Extenders have a distance restriction of 6,000ft (1,829m) over 1-pair of Category 2, up to 4-pair CAT5e / CAT7, wiring from device extension to device extension. Therefore quick, simple site surveys and installation planning are highly recommended. This chapter describes the recommended installation process for the Enable-IT 860 Pro Ethernet Extender Kit.
Unpacking The Enable-IT 860 Pro Ethernet Extender Kit Carefully remove the Enable-IT 860 Pro Kit’s packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact Enable-IT or your distributor for assistance.
Performing The On-Site Installation After removing the Enable-IT 860 Pro Ethernet Extender Kit from the box, and performing the Out Of The Box Testing (OOTBT), all that remains to install the unit onsite is to mount the unit, build the interconnect wiring, add voice lines if needed, and attach the LAN device cabling with the provided Ethernet Patch cords. Mounting The Enable-IT 860 Pro Ethernet Extender Units The Enable-IT 860 Pro extended Ethernet solution is designed for quick wall mounting.
Mode – Yellow Solid LED Off = CO unit On = CPE unit Sync – Green slow to fast flicker LED on power up – indicates negotiation of a link – Green solid LED indicates link established and rapid pulse is traffic Act – Yellow LED Off = No device attached or detected On = Solid, indicates the presence of local LAN On = Blinking, indicates the presence of local LAN traffic Pwr – Green Solid LED indicates the unit is receiving 5v power Troubleshooting First examine the backbone wiring pair and make sure you ha
Switch 3: 17a (over 1,500ft) / 30a (under 1,500ft) Mode 17a Mode – Up / Off Position 30a Mode – Down / On Position (Default) 17a mode is only used for Interlink runs over 1,500ft to 6,000ft. 30a mode is only enabled for Interlink runs under 1,500ft. Switch 4: Signal-to-noise Noise Ratio (SNR) 9dB – Up / Off Position 6dB – Down / On Position (Default) Signal-to-noise ratio is a measurement that refers to how much noise is in the output of a device, in relation to the signal level.
TECHNICAL SUPPORT Enable-IT, Inc.’s Customer Care Team support is available directly to customers and distributors. All support requests are processed through the online support portal. This allows us to provide assigned support ticket numbers in order to bring closure to any technical issues. Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one.
ENABLE-IT, INC. LIMITED WARRANTY Enable-IT, Inc. warrants the Enable-IT 860 Pro Ethernet Extender Kit solely pursuant to the following terms and conditions. 1. PRODUCT WARRANTY. a. Express Warranty. Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, for the four (4) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
DISCLAIMS, TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. NO PERSON (INCLUDING WITHOUT LIMITATION, ENABLE-IT’S EMPLOYEES, AGENTS, RESELLERS, OEMS OR DISTRIBUTORS) IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PRODUCT.
CONTACT US Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: http://support.enableit.com All Rights Reserved 1997 - 2013 Enable-IT, Inc.
