Datasheet

This is information on a product in full production.
April 2015 DocID026906 Rev 3 1/27
SP1ML
SPIRIT1 868 and 915 MHz low power RF modules with integrated
microcontroller
Datasheet
-
production data
Features
Complete RF-ready SPIRIT1 module based
on:
SPIRIT1 low data rate, low power sub-GHz
transceiver
STM32L1 Ultra low power microcontroller
at 32 MHz (32 kB RAM and 128 kB Flash)
BALF-SPI-01D3 868/915 MHz balun with
integrated harmonic filter
Integrated antenna and crystal
Compact size: 14 mm x 13.4 mm x 2.5 mm
863 to 870 MHz operation (SP1ML-868)
902 to 928 MHz operation (SP1ML-915)
Operates from a single 1.8 V to 3.6 V supply
Output power up to +11.6 dBm
Data rates up to 500 kbps
Modulation schemes: 2-FSK, GFSK, GMSK,
OOK, and ASK
Operating temperature: -40 °C to 85 °C
UART interface with AT command set
FCC and CE regulatory approvals
Applications
Home & building automation
Wireless sensor network
Data acquisition equipment
Security systems
Mobile health and medical
Industrial monitor and control
Wireless metering, WMBUS
Internet of things (IoT)
Description
The SP1ML-868 and SP1ML-915 are ultra-low
power & fully integrated RF modules operating
respectively in the 868 MHz SRD and 915 MHz
ISM bands.
The SP1ML module is a compact-size module,
integrating an on-board antenna with easy-to-use
interface, allowing users to easily add wireless
connectivity in designs without requiring in-depth
RF experience, and has all necessary FCC
modular approvals and CE compliance, reducing
time-to-market.
These modules are based on the SPIRIT1 RF
sub-GHz transceiver (with integrated SMPS),
STM32L1 microcontroller, integrated filter/balun
and chip antenna. The UART host interface
allows simple connection to an external
microcontroller with a standard firmware, allowing
AT commands to facilitate RF configuration, data
transmission and reception, using simple point-to-
point communication. Selected STM32L1 GPIO
and peripherals are available for interfacing to
external devices in the user application.
Advanced features of the SPIRIT1 radio are also
accessible. The serial wire debug interface
(SWD) is also available.
The modules are CE compliant and FCC certified
(FCC ID S9NSP1ML).
www.st.com

Summary of content (27 pages)