Ethernet Extension Experts Enable-IT 868 Single Pair PoE+ & Ethernet Extender User Manual All Rights Reserved 1997 -2011 ENABLE-IT - Proprietary and Confidential
Copyright © 1997-2011 Enable-IT, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Enable-IT, Inc. Enable-IT, Inc reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Enable-IT, Inc to provide notification of such revision or change.
CONTENTS ABOUT THIS GUIDE 4 1 INTRODUCING THE ENABLE-IT 868 POE+ & EXTENDED ETHERNET KIT 5 About the 868 PoE+ & Extended Ethernet Kit Key Benefits Summary of Features Multi Use Applications 5 6 6 7 2 INSTALLING THE ENABLE-IT 868 POE+ & EXTENDED ETHERNET KIT Site Plan – Installation Design Considerations Unpacking the 868 Extended Ethernet Kit Perform an out of the box Test Performing the On-Site Installation Mounting the 868 PoE+ & Extended Ethernet Kit Building the 868 Interlink wiring Troubleshootin
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 868 PoE+ & Extended Ethernet Kit. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring.
INTRODUCING THE 868 POE+ & EXTENDED ETHERNET KIT Congratulations on purchasing the Enable-IT 868 PoE+ & Extended Ethernet Kit — the simplest method to install your PoE+ IP Security camera or PoE+ Wireless Access Point using Ethernet or telephone wiring. This is the world’s first solution to deliver Voice, Ethernet Data and Power over Ethernet (PoE+) in a combined package that exceeds the IEEE distance limitations for all Ethernet equipment.
Key Benefits The following list identifies the 868 PoE+ & Extended Ethernet Kit key benefits. • Quad switched LAN RJ-45 10/100 Ethernet ports on each end for expansion without adding a hub or switch on each end. • The Enable-IT 868 PoE+ & Extended Ethernet Kit requires No Power (CPE remote end), No Firmware, No Maintenance • Broadband technology that delivers in-building PoE+ and Ethernet access over existing Category 3 , Category 5e wiring or better up to 3,500ft or 1,067m.
Multi Use Applications Enable-IT 868 PoE+ & Extended Ethernet kit is a versatile multipurpose solution and you have the choice are only installed for the use of PoE+ equipment such as PoE+ IP Cameras and PoE+ WiFi Access Points. Non-PoE+ equipment may be damaged if used and the Enable-IT 868 kit should be used to bridge non-PoE+ equipment.
INSTALLING THE 868 POE+ & EXTENDED ETHERNET KIT The Enable-IT 868 PoE+ & Extended Ethernet Kit have a distance restriction of 3,500ft or 1,067m over 1-pair of Category 3 up to Category 5e / CAT6 wiring from your LAN and power source to the remote PoE+ device. Therefore quick, simple site surveys and installation planning are highly recommended – This is ideal for installing PoE+ IP Security cameras or PoE+ WiFi Access Points.
Unpacking the Enable-IT 868 PoE+ & Extended Ethernet Kit Carefully remove the Enable-IT 868 PoE+ & Extended Ethernet Kit all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered. If any items are missing or damaged, please contact Enable-IT or your distributor for assistance.
Performing the On-Site Installation After removing the Enable-IT 868 PoE+ & Extended Ethernet Kit from the box and performing the out of the box testing all that remains to install the unit on-site is to mount the unit, build the interconnect wiring, add voice lines if needed and attach the LAN device cabling with the provided Ethernet Patch cords. Mounting the Enable-IT 868 PoE+ & Extended Ethernet Units The Enable-IT 868 PoE+ & Extended Ethernet Kit is designed for quick wall mounting.
2) Check for a firm connection of the RJ-45 connections in each 868 unit, check any splice points in the Interlink wiring and that the 5v power adapter is applied to the 868 CO and the 360 PoE+ injector is powered up. 3) You can always perform another out of the box test to prove out the equipment and then focus on your interlink wiring. Performance Settings A DIP Switch is provided on the left side of each unit for setting line performance attributes.
ENABLE-IT LIMITED WARRANTY Enable-IT warrants the Enable-IT 868 PoE+ & Extended Ethernet Kit solely pursuant to the following terms and conditions. 1. PRODUCT WARRANTY a. Express Warranty Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, for the four (4) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
OEMS OR DISTRIBUTORS) IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PRODUCT. IF THE DISCLAIMER OF ANY IMPLIED WARRANTY IS NOT PERMITTED BY LAW, THE DURATION OF ANY SUCH IMPLIED WARRANTY IS LIMITED TO ONE (1) YEAR FROM THE DATE OF PURCHASE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.
CONTACT US European Sales: +44 1 908 560200 +44 1 908 565533 fax http://www.enable-it.eu sales@enable-it.eu North American Sales: +1 888 309-0910 +1 866 389-8605 fax http://www.enableit.com sales@enableit.com Middle East Sales: +971-50-435-8310 http://www.enableit.com sales@enableit.com Other International: +1(702) 924-0402 +1 320-215-6907 fax Page 14 of 14 Asia Pacific Sales: +61 02 8898-9622 +61 2 9939-0005 fax http://www.enable-it.com.au sales@enable-it.com.