Full Product Manual
Congratulations on your recent purchase of the Enbrighten Café Lights. Enbrighten Café Lights are
designed to provide lighting for life with no bulbs to replace ever again! Purchase additional lights to
form one continuous string up to 350 feet!
IMPORTANT: Before installation, please read all the warning statements included on the reverse side of these instructions.
In order to ensure proper installation, please follow each step below:
Step 1 - INITIAL SETUP
1 - Carefully unpack Café Lights from box. Remove the wire ties (see warning on reverse side).
2 - When installing Café Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle should be used. Before installing,
plug the Café Lights into the GFCI receptacle to ensure all lights work properly. IMPORTANT: Unplug the Café Lights prior
to mounting.
Step 2 - INSTALLING CAFÉ LIGHTS
1 - IMPORTANT: Only mount Café Lights to a solid support structure such as joists, beams,
studs or other solid mounting surfaces.
2 - Each Café Light is designed with a universal keyhole for mounting with lights
hanging downward. Hardware options include screws, nails, zip ties, hooks and
more (not included).
3 - Guide wires in compliance with local electrical and building codes may also be used to
support the Café Lights.
4 - Once appropriate GFCI outlet location, mounting surface and hardware are determined,
mount your Café Lights.
5 - When finished mounting, plug the male plug into the GFCI Receptacle and place the
female receptacle cover firmly over the unused outlet.
Step 3 - INSTALLING MULTIPLE CAFÉ LIGHT SETS
Extend the length of your lights by connecting more than one strand together to
form one continuous string up to 350 feet! Simply follow the above installation
steps making sure each connection between strands is secure and the end female
receptacle is securely covered using the receptacle cover when done.
Step 4 - REMOVING CAFÉ LIGHTS
1 - Always unplug Café Lights from their receptacle prior to removing.
2 - Carefully remove each light individually from the mounting hardware. NOTE: For your safety, never pull or jerk lights
from mounting hardware.
3 - Store lights in a dry location.
SAVE THESE INSTRUCTIONS
See reverse side for electrical rating
Available in multiple lengths at www.cafelights.com
Version 2-S
6/2/16