Assembly Instructions

Page 1 of 2
ASSEMBLY & USE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the
following:
 The product is for indoor and outdoor use.
 To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
 To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical
product - not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should
not be played with or placed where small children can reach it.
 Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper
installation.
 This seasonal use product is not intended for permanent installation or use.
 Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources
of heat.
 Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
 Do not let lamps rest on the supply cord or on any wire.
 Unplug the product when leaving the house, when retiring for the night, or if left unattended.
 Do not use this product for other than its intended use.
 Do not hang ornaments or other objects from cord, wire, or light string.
 Do not close doors or windows on the product or extension cord as this may damage the wire
insulation.
 Do not cover the product with a cloth, paper or any material not part of the product when in use.
 The product employs overload protection (fuse). A blown fuse indicates an overload or short
circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional
strings or products that may be attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and check the product. If
the replacement fuse blows, a short circuit may be present and the product should be
discarded.
Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS:
1. Place the pot on a flat floor.
2. Assembly the tree according to following diagram.
3. Connect light strings according to following diagram.
4. Shape the leaves to a natural look according following
diagram. Now you can plug the extension cord to
perform the tree for decoration.
USE AND CARE INSTRUCTIONS:
Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged, or frayed wire
insulation or cords, cracks in the lampholders, loose
connections, or exposed copper wire. Before storing the
product, carefully remove the product from wherever it is
placed to avoid any undue strain or stress on the product
conductors, connections, and wires. When not in use,
store neatly in a cool, dry location protected from sunlight.