Installation Instructions

Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
How Your Solar Garden Product Works
During the day, the solar panel converts sunlight into electricity and recharges
the batteries inside the solar panel. At night, the light turns on automatically using
the electricity stored during the day. The number of hours the light stays on at
night depends on you location and the availability and intensity of sunlight during
the day. Under normal conditions, if the solar panel is charged in full, direct
sunlight all day, the light should stay lit for several hours at night.
Picking the Right Spot/Inserting Stake Lights
Select a garden, lawn or similar location in full, direct sunlight where your solar
product can receive at least 6-8 hours of daily sunlight. Shadowed locations will
not allow the batteries to charge fully and will reduce the hours of nighttime
lighting. Do NOT select locations near nighttime light sources such as
streetlights, flood lights or other strong outdoor or home lighting. This may cause
the solar lights to turn off automatically.
Using Your Solar Garden Product the 1
st
Time
Leave the power switch on the “ON” position until the solar panel has been
charged in direct sunlight for 6-8 hours. This allows the rechargeable batteries)
to reach maximum capacity. If the light does not come on after a full day of
charging, check to be sure the power switch is in the “ON” position and that the
solar cell is in a bright, sunny spot rather than in the shade. The light will
automatically turn on at dusk and off at dawn.
ASSEMBLING & USING YOUR PRODUCT
2