Installation Instructions

DO NOT RETURN TO RETAILER

IF YOU HAVE ANY

QUESTIONS OR CONCERNS

PLEASE CALL

BOND MANUFACTURING

TOLL FREE AT

+1-866-771-BOND(2663)

MONDAY – FRIDAY 8AM TO 4:30 PM PST

OR EMAIL TO

Customer.service@bondmfg.com

OR VISIT OUR WEBSITE ON

www.bondmfg.com

STOP

PAGE 1
STOP DO NOT RETURN TO RETAILER IF YOU HAVE ANY QUESTIONS OR CONCERNS PLEASE CALL BOND MANUFACTURING TOLL FREE AT +1-866-771-BOND(2663) MONDAY – FRIDAY 8AM TO 4:30 PM PST OR EMAIL TO Customer.service@bondmfg.com OR VISIT OUR WEBSITE ON www.bondmfg.
PAGE 2
Assembly Instructions Item#: Y94211 * * WARNING * * Read these instructions carefully and keep the fountain power off until the following assembly process is strictly completed. Notes:          Choose an appropriate location for the fountain. Excessive weight or pressure on any of the fountain sections may cause it to fall. Keep pets, children, or anyone from sitting, leaning, or climbing on any of the fountain components.
PAGE 3
PAGE 4
Troubleshooting - - TURN OFF THE POWER BEFORE YOU CHECK THE FOLLOWING - If pump does not run, or lights are not on -- (1) Check the circuit breaker, try another outlet. (2) Check the water level in the fountain. Running the pump without sufficient water can damage the pump. (3) Check the setting of the flow control on the pump and adjust the flow. (4) Check the pump discharge and intake for dirt and debris. (5) Check the fountain for kinks and obstructions. (6) The pump might be “air locked”.