Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- What’s in the Box
- Enclave and Audio CineHub Overview
- Enclave Audio CineHub Indicators and Connections
- Installation and Setup
- General Speaker Placement
- Basic System Features Continue On App
- Troubleshooting
- Regulatory Statement Enclave Audio CineHome II 5.1 Wireless Audio Home Theater System
- Regulatory Statement Enclave Audio CineHome Pro 5.1 Wireless Audio Home Theater System
- Regulatory Statement Enclave Audio CineHub
- Important Safety Information
- Warranty
- Set Up Guide
- Quickstart Guide
EN11
1. Download and install the Enclave Audio mobile app and follow the on-screen
instrucons on your phone.
2. Plug in all power cables to the rear power connector on each speaker and power
the speakers at a convenient wall outlet.
3. Connect the HDMI cable provided from the CineHub HDMI port to the HDMI port
marked (eARC or ARC) on your television or;
4. If you have elected to use an Opcal connecon, connect the Opcal cable to the
Opcal connector on your TV and the CineHub.
5. Plug in the Enclave CineHub and the CineHub will start the auto-pairing process.
6. The speakers will automacally pair when power is connected to the CineHub
for the very rst me. It may take up to 30 seconds for the system network to be
established. The Enclave Audio app will display the status of the speaker pairing
process.
NOTE: While the system is pairing to the speakers you will not be able to turn on or o
the power unl the pairing process is completed.
NOTE: SATELLITE SPEAKERS & SUBWOOFER BACK PANEL When the Enclave CineHub
is powered o, all the speakers go into a low-power standby state and should remain
plugged in at all mes. The LED indicators on the rear of the speakers will turn o. The
speakers will “power up” again when you turn on the Enclave CineHub.