Owner's Manual

1211
5. CONNECT THE CINEKEY
1. Customers who have WiSA ready TVs or devices can insert the CineKey
directly into a powered USB port on the respective device.
2. Continue setup on the WiSA ready TV or device menu.
6. GENERAL SPEAKER PLACEMENT
To get the best audio reproduction from surround-sound encoded material, Dolby and DTS
recommend you place the speakers in a configuration most similar to the following diagram.
1. Download and install the Enclave Audio mobile app and follow
the on-screen instructions on your phone.
2. Plug in all power cables to the rear power connector on each speaker
and power the speakers at a convenient wall outlet.
3. Connect the HDMI cable provided from the CineHub HDMI port to the HDMI port
marked (eARC or ARC) on your television or;
4. If you have elected to use an Optical connection, connect the Optical cable to the
Optical connector on your TV and the CineHub.
5. Plug in the Enclave CineHub and the CineHub will start the auto-pairing process.
6. The speakers will automatically pair when power is connected to the CineHub for the
very first time. It may take up to 30 seconds for the system network to be established.
The Enclave Audio app will display the status of the speaker pairing process.
a. NOTE: While the system is pairing to the speakers you will not be able to turn on or o
the power until the pairing process is completed.
b. NOTE: SATELLITE SPEAKERS & SUBWOOFER BACK PANEL
c. When the Enclave CineHub is powered o, all the speakers go into a low-power
standby state and should remain plugged in at all times. The LED indicators on
the rear of the speakers will turn o. The speakers will “power up” again when
you turn on the Enclave CineHub.
RIGHT FRONT
SPEAKER
CENTER SPEAKER
SUB
LEFT FRONT
SPEAKER
LEFT REAR
SURROUND
SPEAKER
RIGHT REAR
SURROUND
SPEAKER
Enclave_Manual_FINAL_ReaderSpreads.indd 12-13 9/6/19 1:12 PM