Instructions / Assembly

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18005
5
STEP 2: ASSEMBLE PLANTER BOX
b Repeat step 2.1 with the
Long Posts (G). Ensure
that the long board is
touching the back of the
post channels.
1. Lay out the Short Posts (F)
and slide (1) Long Board (B)
into the post channels.
2. Rotate the posts and board
180 degrees. Drive (2) 2 ½"
Self-Drilling Stainless Steel
Screws (L) through the pre-
drilled holes in the posts as
shown below.
STEP 2.1 STEP 2.2
1
B
2
L
Ensure that the long board is touching
the back of the post channels.
Ensure that the long board is touching
the back of the post channels.
F
G
L