Tiaga Wood Freestanding Screen 73 1/2"H X 36"W 30 min Screen Assembly Approximate time 60 min Surface Mounting Approximate time Assembly Video Scan the QR Code below ASSEMBLY INSTRUCTIONS EC18030 www.encloscreens.com VER.
GENERAL INFORMATION IMPORTANT j Check the inside of the larger pieces in your box for other materials packed inside. j We recommend an area approximately 5’x 8’ for unobstructed assembling. j You should not need to use excessive force when assembling components. j No free replacement parts will be provided for wind related damage.
DETAILED PRODUCT DIMENSIONS & SPECIFICATIONS 36 in 33 in 1/2 in 73 1/2 in 1 1/2 in 4 5/8 in 25 in Tipping may occur if left freestanding in areas with wind exposure 3
LAY OUT MATERIALS BOX CONTENTS A Post (2) B D Slat (25) Feet (2) 1" x 2" x 25" C E Rail (2) 1¼" x 2" x 34¼" Joiner Bracket (2) G F M5*50mm Wood Screw (10) I H M6*30mm Bolt (4) M6*80mm Bolt (4) J Nut (4) K Washer (12) TOOLS AND OPTIONAL HARDW ARE L Lock Washer (8) Wrench (2) NOT INCLUDED FREESTANDING DECK MOUNT PATIO MOUNT Power Drill Power Drill Hammer Drill Phillips Bit Wood Drill Bit Concrete Drill Bit Hammer is only recommended for environments with low wind exposure.
ASSEMBLING We recommend 2 people for a smoother assembly. A x1 1 A x1 Assemble on box or other smooth surface.
3 C x2 C 4 6 A x1 x2
5 F x10 F FREESTANDING x10 SURFACE MOUNTED (RECOMMENDED) PAGE 8 PAGE 9 -13 Surface mounting hardware not included Screen does not serve as a substitute for a security railing for the prevention of falling OR DECK MOUNT PATIO MOUNT Power Drill Hammer Drill Wood Drill Bit Concrete Drill Bit Hammer Freestanding application is only recommended for indoor usage or environments with low wind exposure.
FREESTANDING FREESTANDING D x2 1 E x2 G x4 E J x4 L x1 K x4 L D G 2x FREESTANDING H x4 2 I I x4 I x4 K x4 x2 H x2 D 8 x2 J x8 K x4 K x2 J x2 L x2
SURFACE MOUNTED (DECK) MOUNTED 1 MOUNTED 2 H x4 I x4 J x8 K x4 L x2 9
Refer to mounting hardware instructions to ensure proper installation.
SURFACE MOUNTED (PATIO) MOUNTED 1 MOUNTED 2 H x4 3" 3" I x4 J x8 K x4 L x2 Ensure there is at least 3" between the edge of the concrete and the surface mount.
Refer to mounting hardware instructions to ensure proper installation.
Refer to mounting hardware instructions to ensure proper installation.
www.encloscreens.com support@encloscreens.com 704-892-5222 877-234-6196 6935 Reames Rd. Ste. K. Charlotte, NC 28216 ASSEMBLY INSTRUCTIONS EC18030 VER.
