Installation & Assembly

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19047
Ensuring the routed
holes are facing
down, slide the other
horizontal rail over
the top of the posts.



routed holes in the top

holes in the top rail and
posts align. Drive (4)
¾” self-drilling stainless
steel screws into the
pre-drilled holes.
Ensuring the routed holes are
facing up, slide one rail over the




in the rail and posts align.
Note:
align holes.
B
H
1. Slide the Post Anchors (B)
post. 16" of post anchor should be visible.
2. (K) to drill (4) total holes in
the post anchor through the pre-drilled holes in the

3. (H)
into the pre-drilled holes in the horizontal rail.
K
STEP 4.2 STEP 4.3
STEP 4.4