Instructions / Assembly

Ver 05.05.03

DR1 KD-Classic Décor Oval Rack

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Components included:

1 - Hammered Steel Oval

1 - Cross Bar

4 - Curved Brackets

1 - Grid

Hardware included:

2 - Ceiling Screw Hooks

2 - Chain approx. 6"

2 - 'S' Hooks 2"

12 - Pot Hooks

4 - Grid Brackets - EGB

1 - 1/8" Hex Key

2 - #10 x 3/8" Button Head Screws

2 - #10 x 5/8" Button Head Screws

Toggle Kit

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

PAGE 1
DR1 KD-Classic Décor Oval Rack Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS ASSEMBLY 1) Lay rack body (oval) on firm surface. Protect surface with corrugated box if necessary. 2) Using two #10 x 3/8" button head screws, attach cross bar to both ends of the oval. (The cross bar will fit to the outside of the rack body). Do not fully tighten screws at this time. 3) The curved brackets are pre-assembled as a set, each set will have one curved bracket with a "tapped" (threaded hole) and one with a drilled (no threads).