Installation Guide

Enclume Decorative Shelf Rack
DR1
DR3
Enclume hearth racks are the ultimate in
Quality, design, strength and function.
Congratulations for owning one of the finest
Storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR RACK.
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 - 2" Lag bolts
1 – Rack
Toggler Kit
Components included:
6 - Grid brackets
12 - Pot hooks
1 - Grid
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Decide which direction you want your rack to hang. Enclume's unique design allows for the scrolls to set above of below the
2) shelf.
3) We recommend that you anchor your rack into the solid wood of wall studs. Carefully measure the area where the rack is to
be mounted and install the lag bolts directly into the wood studs. If it is not convenient to install your rack directly into
wood studs you may use the new-technology DRYWALL anchors enclosed with your rack. The steel anchors are very strong
and when installed in drywall will hold 100 lbs. each. Two anchors hold about 200 lbs. Follow the instructions in the
Toggler kit.
4) Carefully measure the area where the rack is to be installed and mark where the lag bolts or Togglers will be inserted.
5) Place two grid brackets on each long side of the shelf and rest the grid on top. Your rack is ready for mounting to the wall.
Use pot hooks provided to hang utensils or other items. All of our hammered steel racks are finished with an industrial wax
designed to give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a
touch-up is ever needed we recommend a "Pledge" like wax product
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty:This product is warranted to be free of material defects for a period of five year from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PORPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone [phone] • Fax [phone]
www.enclume.com