Instructions / Assembly

DR3B-Small Decorative Shelf Rack
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 - 2" Lag bolts
1 – Rack shelf
Toggler Kit
Components included:
6 - Grid brackets
6 - Pot hooks
1 - Grid
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) Decide how you want your rack to hang. Enclume's unique design allows for the scrolls to set above or below the rack shelf.
2) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the rack is
to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack directly into wood
joists you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand manufacturer recommendations for
weight limits included in the instructions in the Toggler kit.
3) Place two grid brackets on each long side of the shelves and one on each short side), and rest the grid on top of the grid brackets.
4) Use the pot hooks provided to hang utensils or other items.
CARE INSTRUCTIONS
1) Your rack and grid have been treated with a finish which will resist corrosion and tarnish. It may be cleaned with a damp
cloth and dried thoroughly. Please do not use abrasive cleaners.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five year from the date of purchase. Your exclusive remedy shall be the
repair or replacement of the defective product, subject to the following conditions: (1) We receive your notice of any defect within the warranty period and (2) You
return the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid, within 20 days following your receipt of a
return authorization number provided to you by Enclume (which RA is obtained by telephoning Enclume at the number below). THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR IMPLIED. ADDITIONALLY, THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PORPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF THIS PRODUCTS.
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com