Installation Guide

Note: Grid as shown in drawing is upside down for illustration purposes. Please turn grid over so crossbars that extend the
width of grid are facing down. This will help to keep grid from sliding out of position when rack is in use.
5/16'
5/16" x 7/8" Button Head screw
5/16" x 3/8" Button Head Screw
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing
injury.
If you need help, please call 1-877-ENCLUME
Phone [phone]
www.enclume.com
WARNING
Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
85-6100 • Fax 360
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTIC ONSEQUENTIAL DAMAGES ULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR C
ARISING HASE OR USE OF ENCLUME'S PRODUCTS. OUT OF THE PURC