Installation & Assembly

DR4LC-LOW CEILING

DÉCOR CLASSIC OVAL

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

4 – 5/16” x 1/2” Button Head Screws

4 – 2” Lag Screws (for wood mounting)

1-4 point, 1/4” Toggler Set (for dry wall mounting) 3/16” Allen Wrench

Rack Components included:

4 – Low Ceiling Arms

1 – Rack Body Oval

1 – Hanging Grid

6 – Grid Brackets, EGB

12 – Straight Pot Hooks, EPHS

See REVERSE SIDE for ASSEMBLY and INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

PAGE 1
DR4LC-LOW CEILING DÉCOR CLASSIC OVAL Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products 24 Colwell Street, Port Hadlock, WA 98339 Phone 360-385-6100  Fax 360-385-6156 Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier.
PAGE 2
ASSEMBLY and INSTALLATION INSTRUCTIONS for YOUR DR4LC RACK Rack Assembly and Installation 1) First locate the four low ceiling arms. Using the four 5/16" x 1/2" button head screws attach the arms to the outside of the rack body oval – as shown in the assembly diagram. Do not fully tighten the button head screws at this time. 2) Now place the rack on a flat surface to level and set the arms to straight -- then tighten all screws to final positions.