Installation Guide

FPTS15-Arch Tool Set
Hardware included:
2 – 5/16” x ½” Button head Screws
1 – 3/16” Allen Wrench
Components included:
1 – Arch Upright
1 – Base
1 – Broom
1 – Shovel
1 – Poker
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) Place the Arch Upright in the inside of the Base, matching holes. Attach with the (2) Button heads
2) Hang the tools on the attached toolbar and your Arch Tool Set is ready to use!
It is important that your rack is assembled correctly. If the unit is assembled
or used incorrectly, it could become unstable and collapse, possibly
causing injury. Natural broom straw is flammable. Keep the broom well
away from open flame. It should not be used to sweep hot coals or ash.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com