Installation Guide

Boot and Mitten Drying Rack
Model HDR3
WARNING:
The parts and hardware included are:
Hardware parts:
6 – 5/16" x 1/2" Button Head Screws
4 – 5/16" x 3/8" Button Head Screws
1 – 3/16" Allen Wrench
4 – Hard Glides
Components:
2 – Legs
2 – Boot Holders
2 – Uprights
1 – Upper Crossbar
4 – Accessory Hooks
See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS
Assembly and Installation Instructions for the Hearth Drying Rack HDR3
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Your exclusive remedy shall be
the repair or replacement of the defective product, which shall be subject to the following conditions: (1) Your notice of a defect is received by Enclume within the
warranty period, and (2) your return of the defective product to Enclume Design Products (24 Colwell St. , Port Hadlock, WA 98339) postage prepaid within 20
days following your receipt of a return authorization number from Enclume (which may be obtained by telephoning the number at the bottom of these instructions).
There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
THE PURCHASE OR USE OF THIS PRODUCT.
Enclume racks are the ultimate in Quality,
design, strength and function. Congratulations
for owning one of the finest storage racks
made.
Enclosed your will find everything needed
for the assembly and use of your hearth
rack.
READ ALL OF THE INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR RACK.
If you need help, please call 1-877-362-5863 or email
[e-mail].