Installation Guide

LR10-Carrier Bag Rack
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
Components and Hardware:
1-Rack upright 6-3/8” x 5/8” Button head screws
2-Long legs 1-7/32” Allen wrench
2 -Short legs 4 -Hard floor glides
1-Cloth carrying bag (may be sold separately)
ASSEMBLY INSTRUCTIONS
1. Slip the floor glides over the ends of the short legs.
2. Place the two long legs over the top of and perpendicular to the two short legs. Attach them together with four of the button
head screws. The screws should be inserted from the top down toward the floor. Tighten the screws only finger tight.
3. Using the two remaining button heads attach the rack upright in the center and on top of the leg assembly.
4. Square up the rack and tighten all the screws.
5. Place the cloth bag into the upright. Seat the strapping handles into the upright flares.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five year from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PORPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Thank you for choosing Enclume!
Enclume racks are the ultimate quality, design,
strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE ASSEMBLING
AND USING YOUR RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com