Instructions / Assembly

ManualsBrandsEnclume ManualsHeating, Ventilation, and Air ConditioningRectangular Log Rack with Hammered Steel Finish

Enclume Rectangular Firewood Rack

LR1A and LR1B

Enclume racks are the ultimate in

Storage racks made.

WARNING:

READ ALL OF THE INSTRUCTIONS

BEFORE ASSEMBLING AND USING

YOUR RACK.

All of our hammered steel racks are finished with an industrial wax designed to

LR1A give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry

thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge"

like wax product.

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

4 – 3/8” x 5/8” Button head screws

2 – 3/8” x ½” Button head screws

1 – 7/32” Allen wrench

4 – Hard Glides

Components included:

2 – Uprights

2 – Legs

2 – Kindling Holders LR1B

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

It is important that your rack is assembled correctly. If the unit is

assembled or used incorrectly, it could become unstable and

collapse, possibly causing injury.

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

WARNING

Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid

within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the

customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

Summary of content (2 pages)

PAGE 1
Enclume Rectangular Firewood Rack LR1A and LR1B Enclume racks are the ultimate in Storage racks made. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK. All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax product.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS for the LR1A and LR1B Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier. The parts and hardware included are: Hardware included: 4 – 3/8” x 5/8” Button head screws 2 – 3/8” x ½” Button head screws 1 – 7/32” Allen wrench 4 – Hard Glides Components included: 2 – Uprights 2 – Legs 2 – Kindling Holders Hard Glides Rack Assembly: 1) Slip the floor glides over the end of the legs.