Installation Guide

LR36 and 37 Rectangular Log Rack

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

easier. The parts and hardware included are:

Hardware included:

2 – 3/8" Button head screws

4 – 5/8" Button head screws

1 – 3/16" Allen wrench

Components included:

2 – Rectangle Body Pieces

2 – Legs

2 – Lower Support Bars

1 – Upper Support Bar

See reverse side for ASSEMBLY INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

PAGE 1
LR36 and 37 Rectangular Log Rack Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly easier.
PAGE 2
ASSEMBLY INSTRUCTIONS Rack Assembly: 1) Align one of the two rectangle body pieces with one of the legs. Place one of the lower support bars on top of the rectangle body. Thread one 5/8" button head through the support bar and through the rectangle body screwing into the threaded leg hole. Tighten only finger tight. 2) Repeat with the other support bar and then the other body for the other side. 3) Join the top of the two rectangle body pieces with the upper support bar.