Installation Guide

LR9-LOG RACK
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 – 3/8” x 5/8” Button head screws
1 – 7/32” Allen wrench
4 – Hard glides
Components included:
2- Leg
2- Uprights
Uprights
Legs
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) Slip the floor glides over the ends of the legs.
2) Place the curved uprights on top of and perpendicular to the legs. Using the Allen wrench and the four 5/8” button head screws,
attach the legs and the uprights together. The screws should be inserted from the top down toward the floor. Tighten the screws
only finger tight.
3) Square up your rack and tighten all button head screws using the hex key supplied.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing
injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five year from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PORPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Thank you for choosing Enclume!
Enclume racks are the ultimate quality, design,
strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE ASSEMBLING
AND USING YOUR RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com