Installation Guide

ManualsBrandsEnclume ManualsKitchenPremier Classic Rectangle Ceiling Pot Rack in Hammered Steel

Enclume

All of our hammered steel racks are finished with an industrial wax designed to

give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry

thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge"

like wax product.

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

2 – Ceiling Screw Hooks

8 – 3/8” x ½” Button Head Screws

1 – 7/32” Allen Wrench

Components included:

1 – Rectangular Base without center bar

4 – Arms

1 – Upper Hanging Rectangle

12 – Angled Pot Hooks

6 – Straight Pot Hooks

1 – Grid

6 – Straight Pot Hooks

6 – Grid Brackets

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid

within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the

customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

Enclume racks are the ultimate quality,

design, strength and function.

Congratulations for owning one of the finest

Storage racks made.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE ASSEMBLING

AND USING YOUR RACK

CLASSIC RECTANGLE

without Center Bar

PR1

If you need help, please call 1-877-ENCLUME

Enclume Design Products, Inc.

24 Colwell Street, Port Hadlock, WA. 98339

Phone 360-385-6100 • Fax 360-385-6156

www.enclume.com

Summary of content (2 pages)

PAGE 1
CLASSIC RECTANGLE without Center Bar PR1 Enclume Enclume racks .are the ultimate quality, design, strength and function. Congratulations for owning one of the finest Storage racks made. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS for PR1 Rack Assembly 1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting. 2) Attach the arms to the upper hanging rectangle, leaving the button head screws loose. 3) Place the arms over and on the outside of the lower rectangular base. 4) Insert the lower button head screws through the arms and the rectangular base positioning the arms squarely. Tighten the lower button head screws.