Installation Guide

QR1-QUILT RACK

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

6 – 3/8” x ½” Button Head Screws

1 – 7/32” Allen Wrench

Components included:

2 – Upright Supports

2 – Side Cross Supports

2 – Lower Brackets (previously installed)

1 – Top Cross Bar (with curled ends)

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

PAGE 1
QR1-QUILT RACK Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products 24 Colwell Street, Port Hadlock, WA 98339 Phone 360-385-6100  Fax 360-385-6156 Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS Rack Assembly 1) Place the side cross bars on the inside of the upright supports and attach with four ½” button head screws, going from outside the upright supports through the side cross bars, so that the heads of the screws show from the outside of the rack. Leave loose. 2) Place the top cross bar underneath the top of the upright supports.