Installation Guide

QR3-QUILT RACK

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

4 – 5/16” x 3/4” Button Head Screws

2 – 5/16” x 1” Button Head Screws

6 – 5/16” Acorn Nuts

1 – 3/16” Allen Wrench

Components included:

2 – Upright Legs

2 – Straight Supports

1 – Curved Support

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality, design,

strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE ASSEMBLING

AND USING YOUR RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

1” BUTTONHEAD SCREW

PAGE 1
QR3-QUILT RACK Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products 24 Colwell Street, Port Hadlock, WA 98339 Phone 360-385-6100  Fax 360-385-6156 www.enclume.com Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS ¾” BUTTONHEAD SCREW Rack Assembly 1) Lay the upright legs on the floor. Insert the curved support between the scroll section of the upright legs. Secure with a 1” button head screw by inserting the screw through the hole on the scroll section of the upright leg and curved support and into the threaded hole on the other side of the upright leg. 2) Repeat for the other upright leg. Snug the 1” button head screws, but do not tighten all the way..