Operations Guide

Intelligent Electronic swing handle – User operations
guide
Rev.1.0 4
• Safety Instructions
• Please refer to the below instructions before using the Ihandle. Save this manual for future reference.
• ■ If cleaning The Ihandle is required. Don’t use liquid or spray detergent; use a moist cloth.
• ■ Install and operate the Ihandle Preferably, in an air-conditioned environment with
• temperatures not exceeding 50º Celsius (122º Fahrenheit).
• ■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
• ■ Install the Ihandles Communication and door contact cables in such a way that others won’t trip or fall
over it.
• ■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the Ihandle may cause damage.
• ■ Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate the warranty.
• ■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel
Take care when the swing handle is in the open position, to avoid personal injury or damage to the swing handle body.
DO NOT use excessive force to open the swing handle and always fully open the swinghandle by gently opening in an
upwards position. Once fully in the upwards position turn the handle either left or right based on the position of the rotation
limiter. Failure to operate the handle correctly can lead to damage to the handle body.
Standard warranty 2 years repair or replace. See exclusions below
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,
or failure to follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized persons.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power fluctuations or failure.
• Use of third-party parts not meeting our specifications.
• Normal wear and tear.
• Any other causes which do not relate to a product defect.