- Encore Electronics Inc. Server User Manual

F. Try to issue a print job to the desired printer. The Control Center will automatically

do a connect operation. The print job will be issued to that printer.

G. Even if you have properly setup an auto-connected printer, the Control Center

must be running (in the background) while a print job is issued. This means you

have to open the Control Center every time you start Windows. In order to skip

this manual operation, you can make the Control Center open automatically after

you login to Windows. Choose the “Configuration” item in the “Tools” menu. The

following window will appear. Click on the check box and then on the “OK” button.

This feature is enabled by default.

If you would like to break the association between the Windows printer and the

physical printer, just click on the association and click the “Delete” button in the

“Auto-Connected Printer List”.

4.7 Network Scanner

For NetUSB scanning, we recommend you use Network Scanner as the following

steps.

A. In the Control Center, click the ENNUS1 server that has the desired MFP (or

scanner) attached.

B. Click the desired MFP (or scanner).