ENXTV-X2 External TV Tuner PRO (Remote controller included) ENXTV Series User’s Guide Version 1.
ENXTV-X2 User’s Guide User’s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of Encore Electronics Inc. ENCORE ELECTRONICS INC.
ENXTV-X2 User’s Guide Contents: Chapter 1: Introduction 4 1.1 Package Contents ................................................................................................................. 4 1.2 System Requirements........................................................................................................... 4 1.3 Main Features....................................................................................................................... 5 Chapter 2: Getting Started 6 2.
Chapter 1: Introduction The ENXTV-X2 is an excellent solution in combining a computer and a TV system without the need for screw driver or software driver. Enhance your computer to a home theater quality system adding a high quality TV receiver, just plug-in cables and power adapter. The ENXTV-X2 provides high quality, high resolution of up to 1680x1050. Watch your favorite TV program while using your computer at the same time or watch your favorite TV program even your computer is turned-off12.
1.3 Main Features Resolution up to WSXGA: 1680x1050 Resolution.
Chapter 2: Getting Started 2.1 Rear panel connectors ENXTV-X2 cable connection is easy. The most typical cable connections are shown in the picture diagram below. Make sure the power cable is not connected when hooking these cables in. CONNECTOR TYPE DESCRIPTION DC In 5mm, INT+, EXT- AC adapter, power in (5V, 2 A) VGA Out 15 pin D-Sub ENXTV-X2 main video output.
CONNECTOR TYPE DESCRIPTION S-Video In 7-pin Min Din S-VHS type external video input source. Can be used for connector DVD, VCR or Camcorder RCA Jack External composite video input source, can be connected to Video In DVD, VCR or Camcorder.。 Audio In (L/R) RCA Audio jack RCA audio jack used for external audio input source. 2.
Chapter 3: Using the ENXTV-X2 This chapter shows how to use the ENXTV-X2. 3.1 PC side VGA resolution setting ENXTV-X2 can be used independent of PC system for a full screen display. In addition to the full screen display, when it is connected in conjunction with the Computer system, the PIP sub video Window can also be displayed at the top of PC monitor screen to let the user watch TV while using the computer at the same time, or just enjoy a full screen TV viewing..
1. In windows system, the VGA resolution setting page can be invoked by a right click on the mouse when it is pointed at an empty monitor screen area. 2. When the “Display properties” page is shown, select the recommended value 1024x768. 3. Click on the “Advanced” button, to select the monitor refresh rate, the recommended vale is 75Hz 4. Click on OK to close the property page. 5.
Chapter 4: Using the Remote Control The included Infra Red Remote control allows you to operate ENXTV-X2 remotely, such as turning your TV on/off, changing channels, adjust volume, etc. Aim the front of the Remote Control at the Remote Control Receiver and press the control buttons as you would on the infrared rays receiver. 4.1 Installing Batteries Open the back cover of remote controller and put in two pieces AAA batteries (alkaline battery recommended). 4.
4.3 How to use the Menu In this section the ENXTV-X2 Main Menu and its operations will be discussed here. Press the MENU button from the remote control to get to this screen (TV mode must be in Full Screen Mode) Use the CH+/CH- keys to move the cursor to the desired item (Left and Right), once the desired selection is highlighted click MENU key to select it. Use the VOL+/VOL- keys move the highlights down to every sub menus and use MENU key to select.
4.
SOUND VOLUME: To adjust Audio Out volume MUTE: Audio Out volume mute BALANCE: To adjust Audio Left or right track Out volume ADVANCED SETTING NOISE REDUCTION: 3 degrees adjust image noise reduction BLACK LEVEL: 2 degrees adjust image black level CHANNEL SURF: 4,9,16 video division of TV wall mode PIP MODE SET: 4,9,16 video division of PIP mode PS-GAME: 2 status about support PS2 game. If “ON”, you can get well quality image when playing PS2 game.
TUNE CURRENT CH: Display current TV channel EXCHANGE CH: Change the current channels sequence list EXCHANGE SAVE: Save the adjusted channels sequence list SKIP: Skip/no skip current TV channel FINE TUNING: Adjust current TV signal quality AUTO SCAN: Auto process of scanning TV signal MANUAL SCAN: manual process of scanning TV signal
SYS TVSYSTEM: PAL system standard setting BLUESCREEN: Background color is blue when no signal input VIDEOSOURCE: TV\AV\SV input video source selection DISPLAY SCALE: Switch to wide image resolution.
OSD LANGUAGE: OSD menu language selection: Chinese and English H POSITION: Adjust OSD Horizontal position V POSITION: Adjust OSD vertical position BACK COLOR: Change the OSD back color TRANSPARENCY: Adjust OSD background transparency OSD TIMEOUT: OSD caption reserved time Chapter 5: Technical Support Visit our web site at http://www.encore-us.com for our tech support contact information and policy information. Version: 1.