User's Manual

3
www.encore-usa.com
C — Software Installation
1.
 Click “Cancel,” if you see the ‘Found New
Hardware Wizard’ window when you start
Windows for the first time after installing the
hardware.
2. Insert the ‘Installation CD” to the CD-ROM drive. Depending on your computer’s
configuration, one of the following 3 scenarios will happen (A , B or C).
A. The ‘Encore Welcome Window’ appears automatically, and then, the window
switches to the ‘Quick Setup’ window in Step 3.
B. The ‘AutoPlay’ window appears automatically
 If you see the ‘AutoPlay’ window instead, select
“Run autorun.exe.”
C. Use ‘Run Command’ when A or B does not appear.
 If neither the ‘Encore Welcome Window nor the
‘AutoPlay’ window appears, type “D:\autorun.exe”
in the “Run Command” window in the Start menu
(
) (‘D’ is the drive letter of your CD-ROM drive).
Note:
You can use “Browse” to find the CD-ROM drive letter.
If the “Run command” window is not in the Start menu, go to the Start menu (
)
→ type “run” in the “search box” → select “Run” in the list of results.
3. Quick Setup Window
 Click the “Software & Driver Installation
(
)” icon.