User's Manual

6
www.encore-usa.com
E — Using Encore Wireless Wizard in Windows XP
®
1.
1. Right-click
on the “Encore Wireless
Manager Tray Icon ( ).”
2. Select “Set Wizard.”
2.
1. Check “Wireless Local Area Networks
(Infrastructure).”
2. Click “Next,”
in the ‘Select Operation Mode’ window.
3.
1. Select the ‘SSID’ (wireless network name)
you want to connect to.
2. Click “Next,”
in the ‘
Select The Infrastructure Connection
List’ window.
4.
 Only enter and confirm the “Network Key”
(also called password, passphrase or
pre-shared key) of your router or access
point,
in the ‘Wireless Network Properties’ window.
5.
1. Check “Obtain an IP address
automatically” and “Obtain DNS server
address automatically.”
2. Click “Finish,”
in the “Setup TCP/IP” window.
6.
 The ‘Encore Wireless Manager Tray Icon’
at the lower right corner of the screen will
become green (
) when connection is
successful.
F — Technical Support
Before you contact our technical support, please read the User Manual in the Installation CD
and visit the support section in our website at www.Encore-USA.com
. You can submit your
support request directly on our webpage. You can also reach us through one of the support
hotlines or emails listed on the back of this pamphlet.