User's Manual

26
www.encore-usa.com
B3. Manual Connection
A.
1. Go to the “Available Network” tab;
2. Select the “SSID” (wireless network
name) of your choice;
3. Click “Add to Profile;”
4. If the selected network has wireless
security enabled, Encore Wireless
Manager will automatically detect the
wireless security option.
Note: The ‘Unsecured Network’’ warning
window will appear if there is no wireless
security enabled. Click “OK” if you want to
proceed.
B.
z Only enter and confirm the “Network
Key” (also called password,
passphrase or pre-shared key) of the
router or access point,
when you see this ‘Wireless Network
Properties’ window.
Note: For most users, no need to change
‘Network Authentication’ and ‘Data
encryption.’
C.
z Once connected, the tab will
automatically switch to the “General”
tab. The ‘Signal Strength’ and ‘Link
Quality’ bars will become active and
green.
Note: The ‘Encore Wireless Manager
Tray Icon’ at the lower right corner of the
screen will become green as well.