User's Manual
31
www.encore-usa.com
Appendix C. Connecting to Wireless Networks with Wireless
Zero Connection in Windows XP
®
Alternatively, you can use Windows Wireless Manager (also called Wireless Zero
Connection or WZC) to connect to wireless networks in Windows XP by following the steps
below.
A. 1. Open ‘Encore Wireless Manager.’
2. Check “Windows Zero Config” at the
bottom of the window.
Note: You cannot use Windows ‘Wireless
Zero Connection’ and ‘Encore Wireless
Manager’ to manage wireless networks at
the same time. To give control back to
‘Encore Wireless Manager,’ you need to
uncheck ‘Windows Zero Config.’
Note: If the “Windows Zero Config” checkbox does not appear in Encore Wireless
Manager, you need to go to “Start menu
” → “Control Panel” → ”Settings” →
“Administrative Tools” → “Services,” and then enable “Wireless Zero Configuration.”
B.
1. Right-click on ‘Windows Wireless
Manager Tray Icon
;’
2. Click “View Available Wireless
Networks.”
C.
1. Select the ‘Wireless Network Name’
(SSID) of your choice;
2. Click “Connect.”