TREADMILL EC1500-C OWNER’S MANUAL KEYS Fitness Products, LP P.O.
Table of Contents Information Page # Table of Contents 2 Specification Sheet 3 Important Safety Information 4 Before You Start 5 Warm Up Exercises 6 Assembly, Moving Instructions 7 Power Requirements 8 Console Functions and Descriptions 9 Program and Operating Instructions 10 & 11 Program Descriptions and Profiles 12 Belt Adjustments and Tension 13 Change to MPH or Km/H 14 Troubleshooting Guide 15 Parts and Diagrams 16 Parts List 17 Warranty Registration (Mail In Form) 18 P
Specification Sheet ♦ Horsepower (Continuous) 2.5hp ♦ Display Type 5 Window LCD ♦ Electronics One touch ♦ Pre-Set Programs 3 ♦ Custom Programs 6 ♦ User Programs 0 ♦ Heart Rate Interactive No ♦ Power Incline 12% ♦ Roller Diameter 1.
Important Safety Information 1) WARNING! Before using this treadmill or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Before You Start Thank you for purchasing a KEYS treadmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner’s Manual and become familiar with the operation of your new treadmill. ♦ Remember to take the time to perform the stretching exercises provided to avoid injury. ♦ Do not stand on the walking belt while pressing the Power button or Start/Stop button.
Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This is especially im- portant for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the muscles and raising body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up.
Assembly, Moving Instructions Assembly This KEYS treadmill is shipped in one piece and fully assembled. After opening the box, remove any packing materials from the treadmill. Do not throw away any packing materials until the unit is working properly. Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. Moving CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERATING POSITON.
Power Requirements ARNG! IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET. HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power.
Console Functions and Descriptions There are five display windows on the control panel to provide feedback information. TIME WINDOW ♦ TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) ♦ INTERVAL TIME: Indicates countdown in seconds to the next interval starting at 5 seconds and counting to 0 seconds SPEED WINDOW ♦ SPEED: Indicates MPH (miles per hour) or KMH (kilometer per hour) in .
Program and Operating Instructions ♦ QUICK START / MANUAL MODE ♦ Plug into a surge protector outlet. Attach RED Safety Key to treadmill console. ♦ Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. ♦ Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. The TIME window will flash. ♦ Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving.
Program and Operating Instructions PROGRAM MODE ♦ Plug treadmill into a surge protector outlet . Attach RED Safety Key to treadmill console. ♦ Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. ♦ Press POWER button. There will be an eight (8) second delay before data can be entered. The TIME window will flash. ♦ There are four (3) pre-set and six (6) custom pre-set programs on the EC1500-C. The treadmill includes FAT BURN, CARDIO, and WARM-UP programs.
Program Profiles 12 11 10 9 8 7 6 5 4 3 2 1 SPEED 12 11 10 9 8 7 6 5 4 3 2 1 INCLINE SPEED INCLINE 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 The Fat Burn Program is designed to vary the treadmill elevation, while maintaining a constant walking belt speed. 12 11 10 9 8 7 6 5 4 3 2 1 The Cardio Program is designed to vary the treadmill Speed, while maintaining a constant Elevation.
Belt Adjustment and Tension WARNING! Do not overtighten rollers! This will cause premature roller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Your new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts to the left or right while walking: WALKING BELT IS SHIFTING TO THE LEFT (Diagram 1) First, turn treadmill on to run at 1 mph.
Change Miles per hour to Kilometers per hour Your treadmill will operate in British Units (miles per hour) or International Units (kilometers per hour). All treadmills are calibrated at the factory for British Units (miles per hour). To change the display to read in kilometers, follow the steps described here: 1) Turn power OFF on the console. (Do not unplug treadmill) Attach the magnet safety key to the console.
Troubleshooting Guide Treadmill will not start. 1) Is the RED Safety Key Attached to the Console? 2) Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” on page 8) 3) Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in.
Parts & Diagrams 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 05-0001-Extrusion side board deluxe/left 05-0001-Extrusion side board deluxe/right 04-0008-Belt walk spliced 18 x 105WW 24-0006-Front roller assembly 09-0013-Rear roller assembly 03-0004-Walkboard waxed 06-0008-End cap 12-0022-Actuator 400lb Maytech 06-0026-Motor base pan 06-0079-Small motor fan 12-0033-Motor MCM 2.
Encore 1500-C Parts List Parts List - EC1500C PART # DESCRIPTION QTY PART # DESCRIPTION QTY PART # DESCRIPTION QTY 09-0013 ROLLER-REAR 20MM SHAFT 1 15-0103 MANUAL-EC1500 1 02-0108 SCREW-PPH 10 X 5/8" 12-0033 MOTOR MCM 2.
KeysEncore 1500-C Treadmill KEYS FITNESS PRODUCTS, LP – LIMITED WARRANTY PLEASE CONSULT YOUR PHYSICIAN BEFORE USING THIS PRODUCT. This Limited Warranty applies in the United States, Canada, and Mexico to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period on the ENCORE 1500-C to the original purchaser is (lifetime) on the frame, (10) years on the motor, (2) years parts, and (2) year labor.