User`s guide

ENLTV User’s Guide -

1. Select the video signal format in your area (NTSC

or PAL) from the “TV Tuner Standard” drop-down

menu.

2. Select “Line-In” to drop-down menu of the “Audio

Input Source” and the “Volume Control Source”.

3. Click “Next”

NOTE:

• You must select same source for

both “Audio Input Source” and

“Volume Control Source”.

• The name of your “Audio Input

Source” may vary depending on

your sound card.

4. This step will give you an option to scan for TV

channels. Select which signal source you are

connected to in the “TV Scan Type” line then click

“Search”. There are two types of scans.

i. One is scan by TV channel table “Cable”,

“Antenna” and “Extend”

ii. One is scan by frequency that scans low

frequency to high frequency. The “Auto”

scan mode is not for the TV table order.