User`s guide

ENLTV User’s Guide -

Chapter 2: Getting Started

2.1 - ENLTV / ENLTV-FM Hardware Installation

Install the ENLTV / ENLTV-FM PCI Card to the

computer’s available PCI slot according to your

computers manual and new hardware installation

procedures. Make sure that the computer’s power

cord is unplugged before inserting the ENLTV /

ENLTV-FM card to the PCI slot. ENLTV /

ENLTV-FM supports PCI bus 2.1 and above.

Refer to the device connection diagram below for port connections:

Caution:

Take an extra care handling the Remote sensor cable, do not insert or remove the sensor

cable while the computer is powered-on. Otherwise, it can cause the ENLTV / ENLTV-FM

to malfunction.