User`s manual

ENRTR-514 User’s Manual
- 12 -
b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window below will appear.
‧ If you decide to use IP address from the Broadband Router, select “Obtain an IP address
automatically”.
‧ If you decide to use specific IP address, select “Use the following IP address”. Make sure
enter correct addresses in “IP Address” and “Subnet Mask” fields.
‧ You must set The Broadband Router’s IP address as “Default Gateway”.
‧ If the DNS Server fields are empty, select “Use the following DNS server addresses” and
enter the DNS address is provided by your ISP, then click “OK”.