User`s manual

ENRTR-514 User’s Manual
- 7 -
2. PC Configuration
User needs to configure TCP/IP network settings, Internet access configuration for each system within the
ENRTR-514 Broadband Router’s LAN network. By default, the Broadband Router acts as a DHCP
server for server version of Windows, it automatically assigns IP address to each system when systems
boot up. For all non-server versions of Windows, the default TCP/IP setting acts as a DHCP client. If
user chooses fixed IP addresses for client systems, the Gateway of the client system must be set to the
proper IP address of the Broadband Router and DNS of the client system should be set to the address
provided by your ISP.
2.1 TCP/IP Networking
Checking TCP/IP Settings for Windows 2000
a) Select “Start  Control Panel  Network and Dial-up Connection” and right click “Local
Area Connection” then click “Properties”,
Your computer network device,
could be Intel, Broadcom, Atheros
or Realtek Ethernet controller
Components depend on what
service you installed before