User`s manual

Software Driver Installation
ENUET-3USB User’s Manual
Encore Electronics Inc.
Tel – [phone]
Fax – [phone]
Web Site – www.encore-usa.com
For MS Windows Users
NOTE:
DO NOT connect the ENUET-3USB to your computer at this time. You will be
instructed to do so later.
1. Insert the provided setup CD into your disc drive. An Encore Welcome
screen will pop up briefly followed by the Main Menu as seen in the images
below: The USB Hub is a Plug-N-Play, no driver needed. The ”Windows
Driver” icon in the main menu is for the 10/100 Ethernet Adapter only. Click
on the “Windows Driver” icon to start the driver installation.
If for some reason the Welcome and the Main Menu screens did not
automatically pop up, you can load the driver manually by locating the
setup.exe file under the Windows folder in the CDROM, double-click the
setup.exe file and proceed to Step 2.
Welcome Screen
4