Operating instructions

UNPACKING AND SETUP

This section provides unpacking and setup information for the ENUWI-NX2

Wireless 802.11n USB Adapter.

Unpacking

The box should contain the following items:

 One ENUWI-NX2 Wireless 802.11n USB Draft 2.0 USB Adapter

 One Driver & Utility CD-ROM

If any item is found missing or damaged, please contact your local reseller or the

store of purchase for replacement.

Setup

Before installation, check the following:

 Make sure your computer is running at least a 300MHz or above processor with

256MB RAM or above

 Make sure the USB port where the ENUWI-NX2 Wireless 802.11n USB

Adapter is to be used is a USB 2.0 port

 The operating system on your computer must be any of the following:

Windows® 2000 (Service Pack 4), XP (Service Pack 2), Windows Vista™

 A draft 802.11n or 802.11b/g access point.

 Make sure the environment has minimal radio signal interference and/or

obstructions.